SN-MT-ZAM
Zn-Al-Mg and Carbon Steel Ground Mount
A dedicated modular steel package for open-ground PV tables.
View specifications
PV Mounting Systems / SN-MT-GROUND
A ground-structure overview with steel material and foundation choices.
SN-MT-GROUND is a general open-ground PV structure with steel material choices and screw or concrete piles. SolarNova is a supplier/exporter; listed figures are indicative.
TECHNICAL OVERVIEW
| Installation Site | Primarily open ground; other uses reviewed only where required by the project |
|---|---|
| Material | Typically Zn-Al-Mg coated steel or Q235B carbon steel; aluminum rails/interfaces where specified |
| Foundation/Fixing | Ground-screw or concrete pile foundations after soil review |
| Max Wind Speed | Typically up to 60 m/s, subject to project calculation. Final specs confirmed per project in written quotation. |
| Max Snow Load | Typically up to 2.0 kN/m², subject to project calculation. Final specs confirmed per project in written quotation. |
| Tilt Angle | Typically 10–35°, project-specific. Final specs confirmed per project in written quotation. |
| Module Compatibility | Module format, orientation and clamp zones confirmed per layout |
| Surface Finish | Zn-Al-Mg coated steel often selected for corrosion exposure; carbon steel typically hot-dip galvanized. Final specs confirmed per project in written quotation. |
| Design Reference Standards | Designed with reference to applicable regional wind and snow design codes; project-specific verification required |
| Warranty | 10-year product warranty, 25-year design service life. |
SolarNova supplies and exports modular ground structures assembled from posts, beams, rails and mid/end clamps. This system overview covers Zn-Al-Mg coated steel and carbon-steel options, with aluminum rails or module interfaces where specified. Listed figures are indicative.
Zn-Al-Mg surfaces are often chosen for corrosion exposure, while carbon steel is typically hot-dip galvanized. Sites with higher wind or snow exposure can be considered when the structure is designed for them. Ground screws and concrete piles both require soil investigation; the listed envelopes do not establish site capacity.
SN-MT-ZAM
A dedicated modular steel package for open-ground PV tables.
View specificationsSN-MT-GROUND-AL
Light structural handling with project-selected aluminum ground supports.
View specificationsSN-GS Series
Helical foundations selected from site investigation and load testing.
View specificationsUse this page to compare structure and foundation choices. The dedicated aluminum and steel/Zn-Al-Mg pages describe the material-specific packages in more detail.
Typically Zn-Al-Mg coated steel or Q235B carbon steel; aluminum rails/interfaces where specified
Send the module drawings, site survey, local design loads and corrosion conditions. Listed figures are indicative; final specs confirmed per project in written quotation.
Project quantity; sample availability and MOQ confirmed on inquiry. Typical lead time: 15–20 days after order and drawing confirmation; samples and standard parts faster. Export cartons or protected pallets; loading plan confirmed with quotation.
10-year product warranty, 25-year design service life.
Contact us; commercial terms are confirmed in the written quotation.
LET’S BUILD WHAT’S NEXT
Share your layout, specifications and delivery requirements. Let’s build a coordinated supply plan.