SN-GS Series
Helical Ground Screw Piles
Helical foundations selected from site investigation and load testing.
View specifications
PROJECT-FOCUSED PRODUCT SUPPLY
PV Mounting Systems
Roof, BIPV, carport, ground and tracker structures selected through project review.
SolarNova supplies and exports mounting options for metal/color-steel and tile roofs, carbon-steel and ballasted flat-roof layouts, aluminum and Zn-Al-Mg BIPV, and carports. Ground options include Zn-Al-Mg/carbon-steel and all-aluminum structures, ground screws, fixed adjustable mounts and 1P/2P horizontal single-axis trackers. Specifications are indicative and require project verification.
SN-FN Series
PV Plant Perimeter Mesh Fence
PVC dip-coated welded-mesh fencing for solar power plant perimeters.
View specifications
SN-MT-BIPV-AL
Aluminum BIPV Roof Mounting System
An in-roof style module support and drainage arrangement.
View specifications
SN-MT-GROUND-AL
All-Aluminum Ground Mounting System
Light structural handling with project-selected aluminum ground supports.
View specifications
SN-MT-CS
Carbon Steel Roof and Ground Mounting Structure
C-section members configured for roof or open-ground projects.
View specifications
SN-MT-ADJ
Fixed Adjustable Ground Mounting System
Scheduled tilt changes on a fixed, non-tracking support structure.
View specifications
SN-MT-FLAT
Flat Roof Ballasted Mounting System
Ballasted and tilt-leg layouts for structurally reviewed commercial roofs.
View specifications
SN-MT-GROUND
Ground Screw Mounting System
A ground-structure overview with steel material and foundation choices.
View specifications
SN-MT-METAL
Metal Roof Mounting System
Attachments selected around the roof profile and supporting structure.
View specifications
SN-TR-1P
1P Horizontal Single-Axis Tracker
Project-configured horizontal single-axis tracking with reviewed stow and control settings.
View specifications
SN-TR-2P
2P Multi-Point Horizontal Single-Axis Tracker
Project-configured horizontal single-axis tracking with reviewed stow and control settings.
View specifications
SN-MT-CAR
Solar Carport Structure
Aluminum or carbon-steel canopies combining parking and PV generation.
View specifications
SN-MT-TILE
Tile Roof Mounting System
Project-configured solar support for tile roof applications.
View specifications
SN-MT-BIPV-ZAM
Zn-Al-Mg BIPV Roof Mounting System
Coated-steel roof support with coordinated main and secondary gutters.
View specifications
SN-MT-ZAM
Zn-Al-Mg and Carbon Steel Ground Mount
A dedicated modular steel package for open-ground PV tables.
View specificationsCompare key specifications
Values marked "sample" are indicative. Verify the selected model and project design before ordering.
| Product / Model | Installation Site | Material | Tilt Angle | Foundation/Fixing |
|---|---|---|---|---|
| Helical Ground Screw PilesSN-GS Series | Fill, clay/cohesive, silt, sandy and sandy-gravel soils after geotechnical review | Typically Q235B-grade carbon steel or equivalent, hot-dip galvanized | Confirm with datasheet | Helical shaft with flange connection; dimensions and connection drawing confirmed per structure |
| PV Plant Perimeter Mesh FenceSN-FN Series | Perimeter of ground-mounted PV power plants | Welded steel mesh panels and posts, PVC dip-coated | N/A — fencing | Posts set in concrete footings or base plates (per site) |
| Aluminum BIPV Roof Mounting SystemSN-MT-BIPV-AL | Roofs reviewed for building-integrated or in-roof style PV | Typically AL6005-T5 aluminum and SUS304 stainless fasteners | Typically follows the reviewed roof geometry; slope confirmed per project. Final specs confirmed per project in written quotation. | Roof connections developed with the supporting structure and building envelope |
| All-Aluminum Ground Mounting SystemSN-MT-GROUND-AL | Open-ground PV arrays on terrain reviewed during design | Typically high-strength AL6005-T5 aluminum structural members; fasteners and foundation interfaces specified separately | Typically selected to suit the site and energy layout; confirmed per project. Final specs confirmed per project in written quotation. | Typically helical ground screws or concrete piles |
| Carbon Steel Roof and Ground Mounting StructureSN-MT-CS | Roofs or ground after structural review | Typically Q235B carbon steel, AL6005-T5 aluminum where used; optional Zn-Al-Mg coated steel such as a typical S350GD ZAM-coated grade, confirmed per project | Typically set by roof geometry or ground layout; confirmed per project. Final specs confirmed per project in written quotation. | Roof attachments or ground foundations selected after structural and site review |
| Fixed Adjustable Ground Mounting SystemSN-MT-ADJ | Ground arrays requiring seasonal or scheduled tilt adjustment | Structural members and adjustment mechanism selected per project | Typical adjustment range about 5° to 60°. Final specs confirmed per project in written quotation. | Typically ground screws or concrete foundations |
| Flat Roof Ballasted Mounting SystemSN-MT-FLAT | Structurally verified flat or low-slope roofs, typically commercial | Typically AL6005-T5 aluminum and SUS304 stainless fasteners | Typically 10–15°, south-facing or east–west. Final specs confirmed per project in written quotation. | Typically non-penetrating ballast on protection pads; tripod or tilt-leg layouts as specified |
| Ground Screw Mounting SystemSN-MT-GROUND | Primarily open ground; other uses reviewed only where required by the project | Typically Zn-Al-Mg coated steel or Q235B carbon steel; aluminum rails/interfaces where specified | Typically 10–35°, project-specific. Final specs confirmed per project in written quotation. | Ground-screw or concrete pile foundations after soil review |
| Metal Roof Mounting SystemSN-MT-METAL | Trapezoidal, corrugated or similar profiled metal roofs | Typically AL6005-T5 aluminum with SUS304 stainless fasteners | Typically roof-parallel unless a tilt kit is specified. Final specs confirmed per project in written quotation. | Roof-attached clamps, L-feet, mini-rail or full rails after roof-profile review |
| 1P Horizontal Single-Axis TrackerSN-TR-1P | Open-ground tracker arrays after terrain and structural review | Typically hot-dip galvanized steel; material confirmed per project | Confirm with datasheet | Foundation type and reactions confirmed per project |
| 2P Multi-Point Horizontal Single-Axis TrackerSN-TR-2P | Open-ground tracker arrays after terrain and structural review | Typically hot-dip galvanized steel; material confirmed per project | Confirm with datasheet | Foundation type and reactions confirmed per project |
| Solar Carport StructureSN-MT-CAR | Parking areas with verified vehicle access and clearances | Typically AL6005-T5 aluminum with SUS304 fasteners, or Q235B or comparable hot-dip galvanized structural steel; aluminum module interfaces as needed | Typically 5–15°, project-specific. Final specs confirmed per project in written quotation. | Typically concrete piers or footings, or ground piles/screws after soil and layout review |
| Tile Roof Mounting SystemSN-MT-TILE | Tile roof rafters | AL6005-T5 rails / SUS304 hooks | Roof pitch, typically 10–60° | Adjustable hooks fixed to verified rafters |
| Zn-Al-Mg BIPV Roof Mounting SystemSN-MT-BIPV-ZAM | Roof installations with reviewed BIPV drainage and structural details | Typically zinc-aluminum-magnesium coated steel with AL6005-T5 aluminum parts as specified | Typically follows the roof drainage layout; slope confirmed per project. Final specs confirmed per project in written quotation. | Connections and self-tapping fasteners where required by the approved design |
| Zn-Al-Mg and Carbon Steel Ground MountSN-MT-ZAM | Open-ground PV sites, including higher wind or snow exposure where designed for it | Typically Zn-Al-Mg coated steel or Q235B carbon steel with hot-dip galvanizing | Typically set by the site layout; confirmed per project. Final specs confirmed per project in written quotation. | Typically helical piles or concrete piles after geotechnical review |
Frequently asked questions
Which mounting families are available?
Options cover tile and metal/color-steel roofs, carbon-steel roof structures, ballasted flat roofs, aluminum and Zn-Al-Mg BIPV, carports, steel and all-aluminum ground mounts, screw piles, fixed adjustable mounts and 1P/2P horizontal single-axis trackers.
How should a roof system be selected?
Review roof profile, supporting members, reserve capacity and waterproofing. Ballasted layouts also need uplift, sliding, protection-pad and drainage checks. BIPV gutters require coordinated envelope detailing and do not guarantee roof waterproofing.
How do ground materials and foundations differ?
Zn-Al-Mg coated steel, galvanized carbon steel and aluminum offer different handling and corrosion considerations. Ground screws or concrete piles follow site investigation; pull-out testing is recommended for screw-pile selection.
What separates fixed adjustable mounts from trackers?
Fixed adjustable mounts change tilt seasonally or on a planned schedule. Horizontal single-axis trackers move through an operating cycle; tracking range, stow, drive and controller scope require project confirmation.
Are listed loads and dimensions project approvals?
No. Figures are indicative and depend on layout, exposure, modules and foundations. Final specs confirmed per project in written quotation.
What is needed for a carport proposal?
Send the parking layout, required clearances, module drawings, site loads and soil information. Aluminum or carbon-steel structures and drainage details are selected after review.
How are payment terms agreed?
Contact us; commercial terms are confirmed in the written quotation.
LET’S BUILD WHAT’S NEXT
Let’s specify your mounting systems.
Share your layout, specifications and delivery requirements. Let’s build a coordinated supply plan.